LED
LE42F2280
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
5) Do not use this Television near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in
accordance with the instructions.
WARNING:
To reduce the risk of fire or electric shock, do
not expose this Television to rain or moisture.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other Television
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized
plug. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protected the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
Television.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
WARNING:
The excessive sound pressure from earphones
and headphones can cause hearing loss.
11) Only use attachments/accessories specified by
the manufacturer.
12) Unplug this Television during lighting storms or
when unused for long periods of time.
13) Refer all servicing to qualified service personnel.
Servicing is required when the Television has been
damaged in any way, such as; power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the Television, the Television has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
14) Mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
15) The ventilation should not be impeded by
covering the ventilation openings with items, such as
newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted candles,
should be placed on the Television.
17) Attention should be drawn to the environmental
aspects of battery disposal.
18) The use of Television in moderate climate.
19) The Television shall not be exposed to dripping
or splashing and that no objects filled with liquids,
such as vases, shall be placed on the Television.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
CAUTION
RISK OFELECTRIC SHOCK
DO NOTOPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Haier is committed to safely recycling
electronic products and product materials.
Please check for a local recycling location in
the United States at: 1800RECYCLING.COM
or call 1.800.RECYCLING.
-2-
SAFETY AND WARNINGS
High voltages are used in the operation of this television
receiver. Do not open the cabinet.
Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual and/or damage
to the television may result if it falls.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Do not block the ventilation holes on the back cover of the TV.
Adequate ventilation is essential to prevent failure of
electrical components.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
or near the television.
Dim:515*320mm(不
包
括
底
座
）
Do not trap the power supply cord under the television
receiver's stand.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the life of your television, and can also
be dangerous.
-3-
INTRODUCTION
Accessories
Main features
■
■
■
■
Integrated ATSC TV tuner for HDTV broadcast reception
High brightness provides a vivid and brilliant picture
Deeper blacks and brighter whites with high contrast
Wide Screen aspect ratio (16:9) for a complete home
theater experience
Power cable...................................
Infrared Remote Control....................
User’s Manual .................................
Battery(AAA)...................................
1
1
1
2
■
■
■
■
HDMI input for true digital connection
VGA port for connection to PC
Built-in stereo speaker system
Full-function Remote Control
Main parameter
Viewing Picture Size (diagonal)
Resolution:
42 inches
1920 x 1080
Power supply
AC 100-240V 50/60Hz
80W
Power consumption
Audio Output Power (THD 7%):
Aspect Ratio:
2x8W
16:9
TV System:
ATSC Digital system and NTSC Analog system
NTSC
Video Signal System:
Receiving Channel:
Cable :1-135 / Air: 2-69 (ATV&DTV)
High-Definition Multimedia Interface (HDMI) Input
x 2
x 1
Component (Y Pb Pr) Video Input
Composite Video Input
Analog RGB (VGA) Input
Audio Input
x 1
x 1
x 2
Headphone Output
Coaxial Output
x 1
x 1
USB Input
x 1
Horizontal definition (TV line)
Composite Video Input >=350
Video Input
YCb(Pb)Cr(Pr)
>=400
>=400
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
-4-
Base Stand Assembly Instruction
1. Place the TV with the display side down on a flat surface. Use a cloth to protect the display.
Position the base stand onto the bottom of the stand neck.
2. Attach the base stand to the stand neck firmly tightening the supplied screws.
Note: This stand is not a swivel stand. Do not attempt to rotate the TV.
-5-
INSTALLATION
Side panel
Front panel
3
1
2
1
3
4
5
2
30 30
1. SOURCE: Display the input source menu.
2. MENU: Display main MENU.
3. CH+/CH-: In TV mode, press "CH+" or "CH-" to
change the channel up and down. In MENU mode, press
"CH+" or "CH-" to select items in standby mode, press
"CH+" or "CH-" to turn on the TV.
1: Remote control sensor.
2: Indicator LED: BLUE
RED
4. VOL+/VOL-: Adjust sound level. In MENU mode,
press "VOL+ " or "VOL- " to adjust the item that you
selected.
POWER ON.
STANDBY.
5. STANDBY: Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
3: Panel keys
REAR Connections
COMPOSITE
COMPONENT
AC-INPUT
100-240V~50/60Hz
All the terminals are (from left to right):
POWER SOCKET, VIDEO, AUDIO INPUT, YPbPr INPUT
Note: AV and component (YPbPr) share the R and L audio inputs.
SIDE Connections
HEADPHONE
PC AUDIO
HDMI1
HDMI2
USB
VGA
COAXIAL
RF
All the terminals are (from left to right):
HDMI1, HDMI2, USB, VGA, PC AUDIO, HEADPHONE, COAXIAL, RF.
Note: 1. When HDMI has an input signal coming from a DVI source then the audio input signal must be
connected to the PC audio input.
-6-
INSTALLATION
ANTENNA
Note:
Aerial connections: IEC (female).
Input impendance:75 unbalanced.
PC
STEPS:
Be sure both the TV and computer are powered off.
1.Connect a VGA and audio cable.
2.Connect the power cord.
3.Turn on the TV, switch to PC mode.
4.Turn on the PC.
HEADPHONE
PC AUDIO
HDMI1
HDMI2
USB
VGA
COAXIAL
RF
-7-
INSTALLATION
PC
PRESET MODE
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
4
720*400
70
60
31.47
31.47
37.50
37.88
46.88
48.36
640*480
75
60
75
60
640*480
800*600
800*600
1024*768
5
6
7
8
9
1024*768
1024*768
70
75
56.48
60.02
1280*1024
1280*1024
1366*768
60
75
60
63.98
80.00
67.50
10
11
-8-
INSTALLATION
AV EQUIPMENT
There are two HDMI ports located on the back of your TV. You can connect a Blu-ray player,
DVD player, or other video equipment through these ports.
There is one component (Y, Pb, Pr) and one composite (AV) video input located on the back
of your TV. You can connect a VCR, cable box, or other video equipment to these jacks.
Please see the diagram below. You may also need to refer to the owner's manual of the device
that you are trying to connect.
HEADPHONE
PC AUDIO
HDMI1
HDMI2
USB
VGA
COAXIAL
RF
HDMI
VIDEO EQUIPMENT with YPbPr
G
B
R
W
R
Y
W
R
Yellow (video)
White(audio L)
Red(audio R or Pr)
Blue(Pb)
B
G
Green(Y)
G
B
R
R
W
COMPOSITE
COMPONENT
AC-INPUT
100-240V~50/60Hz
W
R
VIDEO EQUIPMENT
W
R
TO VIDEO
OUTPUTS
TO AUDIO OUTPUTS
The television's inputs can be connected to the following types of equipment: VCR, multi disc player,
DVD, camcorder, video game or stereo system, etc.....
YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i.
-9-
REMOTE CONTROL
1: POWER
Press to power ON/OFF (standby) the TV.
2: NUMBER KEY
Press to enter the TV channel number and select a channel
(Press " " to choose the sub-channel).
3:
Press to display the on screen display (OSD) menu or
return to the previous menu.
4: CURSOR
When the OSD menu is displayed on-screen, use these
buttons as the up, down, left, right and ENTER buttons to
adjust the various options in the OSD menu.
5: EXIT
YPbPr
CC
TV
MTS
AV
VGA
DTV
STRENGTH
Press to exit the OSD menu.
6: VOL+/-
HDMI
Press VOL+ or VOL- to adjust the volume.
7: P.M
CH LIST
EPG
FAV
Press repeatedly to select a picture mode.
8:
Press to display or exit the TV input source menu.
9: MUTE
Press to switch the sound ON/OFF.
10: RECALL
Press to switch between the current and previously
viewed channel.
11: ENTER
Press to confirm a selection.
12: TV DISPLAY
Press to show the information about the current input source.
13: S.M
Press repeatedly to switch audio modes.
14: CH+/CH-
TV
DISPLAY
Press CH+ or CH- to browse through the TV channels.
15: ASPECT
Press to change the picture aspect ratio.
16: CH LIST
S.M
P.M
To display the channel list. Press to display the channel list.
In DVD mode, press to eject the disc.
17: EPG
VOL
CH
Press to display the DTV Electronic Program Guide.
In DVD mode, press to go to the previous chapter.
18: FAV
Press to display the favorite channels list. In DVD mode,
press to go to the next chapter.
19: HDMI
Press to go directly to the HDMI input source.
20: AV
Press to go directly to the AV input source.
21: DTV STRENGTH
Press to display the DTV signal strength.
22: TV
Press to go directly to the TV input source.
23: YPbPr
Press to go directly to the Component (YPbPr) input source.
24: CC
Press to turn on or off the closed captions.
25: VGA
Press to go directly to the VGA input source.
26: MTS
Press to activate the NTSC TV sounds, such as Stereo,
SAP or Mono tone, and audio languages of DTV.
27: COLOR KEYS
Reserved keys
-10-
OPERATION
1. PICTURE MENU
Note:
In this menu,you can adjust the picture options here,
1) Audio language is available in ATSC/TVmode only.
2) Auto volume is available only when the input signal
volume is too large or there is distortion.
such as contrast, brightness, etc.
Press
to select, press OK to adjust.
Picture Mode
Standard
Normal
Color Temperature
VGA Setting
Aspect Ratio
Fill
3. TIMER MENU
Noise Reduction
Middle
Picture
<
>
In this menu, you can adjust the sleep timer, time zone,
etc. Press
to select,press OK to adjust.
Sleep Timer
Time Zone
DST
Time Format
Clock
Off
Pacific
Off
12-hour
----/--/-- --
Note:
1) If you want to adjust contrast, brightness, color, and
sharpness, the picture mode must be set to personal.
2) This will increase or decrease Warm (red) and Cool (blue)
colors to suit your personal preference.
Time
<
<
Select Cool to give the white colors a blue tint, Normal to give
the white colors a neutral tint, Warm to give the white colors a
red tint.
Standard mode is the default setting, if you select some other
options, the power consumption may change.
Note:
1) Time zone, DST (Daylight Saving Time) and the
clock are available in ATSC mode only, and the Clock
can't be adjusted.
1.1 Advanced
When a PC is connected, you can adjust the PC
advanced settings.
1) H-Pos: Adjust the horizontal position of the screen.
2) V-Pos: Adjust the vertical position of the screen.
3) Clock: Fine tune the screen width.
4) Phase: Fine tune the phase of the screen. Usually
you don't adjust this item.
4.OPTION menu
In this menu, you can adjust the Menu language,
Closed Caption, Restore Default etc.
Press
to select, press OK to adjust.
5) Auto: Auto adjust to fit the screen.
Menu Language
English
Closed Caption
Restore Default
Setup Wizard
Advanced
H-Pos
Option
<
<
Software Update
H-Pos
Clock
Phase
Auto
4.1 Closed Caption
MENU
CC Mode
CC Off
2.AUDIO menu
Basic Selection CC1
In this menu, you can ajust the sound options here.
Advanced Selection Servicel
Option
Press
to select, press OK to adjust.
Sound Mode
Standard
English
PCM
Off
Off
Off
Audio Language
Digital Output
Surround Sound
Audio Only
Auto Volume
MENU
Audio
<
<
-11-
OPERATION
Content
S
1) CC Mode: Switch the closed caption mode.
2) Advanced selection: only available in ATSC.
3) Option: Used to edit the CC font.
FV
V
L
D
Rating Content
(Fantasy (Violence) (Sexual
(Adult
(Sexually
violence)
situation) language) suggestive
dialog)
TV-Y (All
children)
Note:
TV-Y7(Direct to
order children)
TV-G(General
audience)
1) Restore Default: Restore Default will clear all the
programs and reset all the settings to default value.
X
Suggested
age
TV-PG(Parental
Guidance
X
X
X
X
X
X
X
X
X
X
X
5.LOCK MENU
suggested)
TV-14(Parents
strongly
cautioned)
In this menu, you can change the password and adjust
the vchip settings.
Enter the password, to enter the lock menu. The
factory default password is 0000.
TV-MA(Mature
audience only)
And use the ENTER key to lock/unlock Parental
Controls .
Change Password
System Lock
Off
US
2) MPAA: Switching the movie-rating control level;
N/A, G, PG, PG-13, R, NC-17, X.
Canada
RRT Setting
Resel RRT
Lock
<
<
Rating
Description
G
General audiences, All Ages admitted
Parental Guidance suggested. Some material may not be
Suitable for children.
5.1 Change Password
PG
PG-13
R
1) Old password: Input the old password.
2) New password: Input the new password.
Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
Age
3) Confirm password: Input the new password again.
Restrict. Under 17 requires accompanying parent or adult
guardian(age varies in some jurisdictions)
5.2 System Lock
When the System Lock switch is ON, the options
listed below can be adjusted.
5.3 US
NC-17
X
No one 17 and under admitted.
X
is an older rating that is unified with NC-17 but may be
encoded in the data of older movies.
Press the OK button to display the following screen.
5.4 Canada
Press the OK button, to display the following screen.
TV
MPAA
Canada
Canada Eng
Canada Fre
MENU
OK
1) TV: Press the OK buttonto display the following
screen.
MENU
OK
TV RATING
1) Canada English: Switching the English rating control
level: EXEMPT, C, C8+, G, PG, 14+, 18+.
ALL
FV
V
S
L
D
MENU
OK
-12-
OPERATION
Description
Rating
Air/Cable
Cable
Auto Scan
Favorite
Show/Hide
DTV Signal
E
C
Exempt: Includes news, sports, documents and other information
programming: talk shows, music videos, and variety programming.
Children: Intended for younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense of
securityand well-being.
Channel
<
<
C8+ Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen .
G
General: Considered acceptable for all age groups, Appropriate
viewing for the entire family, contains very little violence, physical,
verbal or emotional.
6.1 Air/Cable:
Select Air TV signal and cable TV signal.
6.2 Auto Scan:
PG Parental Guidance: Intended for a general audience, but may not be
suitable for younger children (under the age of 8) because it could
contain controversial themes or issues.
Age
If it's the first time you use the TV, you should scan all
the TV channels first.
14+ Over 14 Years: Could contain themes where violence is one of the
dominant elements of the storyline But it must be integral to the
devel opment of plot or character. Language usage could be profane
and nudity , present within the context of theme.
Press the OK button to confirm, to display the
following screen.
18+ Adults: Intended for viewers 18 years and older and might contain
depictions of violence, which while related to the development of
plot, character or themes, are intended for adult viewing. Could
contain graphic language and portrayals of secretary and nudity.
Auto Scan
Scan all channels
Digital channel only
Analog channel only
2) Canada French: Switching the French-rating control
level: E, G, 8ANS+, 13 ANS+, 16ANS+, 18ANS+.
MENU
OK
Rating
Description
E
Exempt programming
Press the OK button to select a scan type, you will see
the message below which indicates that the auto
search is in progress.
G
General :All ages and children, contains minimal direct violence,
but may be integrated into the plot in a humorous or unrealistic
manner .
8ans+ General but inadvisable for young children :May be viewed by a
wide public audience, but could contain scenes disturbing to
children under 8 who cannot distinguish between imaginary and
real situations. Recommended for viewing with paren.
Age
Auto Scan
DTV+ATV
Programme(S)
Found:
Analog:
Digital:
0
0
0
13ans+ Over 13 years: Could contain scenes of frequent violent scenes
and in tense violence.
Programme(S)
Programme(S)
16ans+ Over 16 years: Could contain frequent violent scenes and violence.
18ans+ Over 18 years: Only for adult viewing. Could contain frequent
violent scenes and extreme violence.
1%...
RF CH 2
DTV
5.5 RRT setting
6.3 Favorite:
in ATSC digital TV mode, it can be adjusted
5.6 Reset RRT:
Press the OK button to choose/delete favorite
channels.
Press OK button, the screen will be displayed as
follow:
6.4 Show/Hide
Press the OK button to display/ hide the current
channel.
6. Channel MENU
6.5 DTV signal
In this menu, you can adjust digital and analog TV
Channels.
Display DTV strength signal. It can't be selected or
adjusted.
Press
to select, press OK to adjust.
-13-
TROUBLE SHOOTING
microwave, electronic equipment,
car/motorcycle, fluorescent light
Component (Y Pb Pr) connections
The LCD TV panel is built with very high precision technology giving you fine picture details
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of red, green, blue, black or white. Please note this does not affect the performance of
the product.
-14-
WARRANTY
-15-
|